[BigDave]

I had the same problem a few months ago. One morning, I noticed from a stop the truck would pull to the right a little. By the time I got home that afternoon it was pulling hard to the left under braking and still pulling to the right from a stop.

I pulled the wheels and inspected both hoses and the calipers. I tried to bleed the right side and sure enough I was just getting drips through the line.

Since both hoses appeared to be about the same age I replaced them both and solved the problem.

------------------
1972 Chevy Blazer 2WD - 400 SBC, bored, ported/polished heads, 9.5:1 dished pistons, Lunati 480/292 cam, electronic ignition, Edlebrock Performer intake, tricked out Rochester 850CFM Quadrajet, long tube headers, Flowmaster 40's, TH350-C with lock-up switch, 2800 rpm stall, shift kit, custom driveshaft, stock GM 12- bolt rear with Auburn Pro Series limited slip 3.73's, 2" drop spindles, 2" drop rear coils, track bar kit, front/rear stabilizers.

1999 30th Anniversary Trans-Am Coupe #1494 - M6, Flow-tech cut-out, Flowmaster, free mods. One of 292 coupes with M6 and in-dash CD.