The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Need photo of installed power steering Pump?

67Mach1 · 08-13-2006, 08:46 AM

Kevin- that looks exactly like the pump and set up I have with the Two bolts in front. (I had to drill and tap one broken bolt out of the block and the top one was helicoiled already.

They are different on the back bracket. My bracket is much thicker where it bolts to the motor mount. IIRC it has about a 1/2 inch thick mount thickness and it is two pieces sandwiched together, if that makes sense?

unfortuantly no camera so No photos last night. Will try to get some today /Monday.

We couldn't get a bolt back in the rear mount but we did get a stud in there and then mounted the unit on the stud. Which was better than the PO as there was nothing there at all.

Thanks for the Photos.

Thomas

08-13-2006, 08:46 AM	#4
67Mach1 Senior Member Join Date: Nov 2005 Location: Round Rock, TX Posts: 1,100	Re: Need photo of installed power steering Pump? Kevin- that looks exactly like the pump and set up I have with the Two bolts in front. (I had to drill and tap one broken bolt out of the block and the top one was helicoiled already. They are different on the back bracket. My bracket is much thicker where it bolts to the motor mount. IIRC it has about a 1/2 inch thick mount thickness and it is two pieces sandwiched together, if that makes sense? unfortuantly no camera so No photos last night. Will try to get some today /Monday. We couldn't get a bolt back in the rear mount but we did get a stud in there and then mounted the unit on the stud. Which was better than the PO as there was nothing there at all. Thanks for the Photos. Thomas __________________ Soon to be selling all but one, or two... Depends on what the Boss has to say....... 67 GMC Shortbed 454 Project more junk and most of it is for sale Last edited by 67Mach1; 08-14-2006 at 07:26 AM.