The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Huck · 08-16-2006, 07:50 AM

Easiest thing to do is to have someone draw the A/C firewall outline on a piece of paper and overlay it on your existing firewall. Mark the A/C design and cut the firewall appropriately. Better solution might be to go to an aftermarket setup eliminating the big box under the hood and a lot of old design stuff under the dash. New systems use a much more efficient compressor, are R34 current stuff, and take up less room. You may have to sacrafice some glove box space but the end result will probable be a lot less expensive.

08-16-2006, 07:50 AM	#2
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,261	Re: A/C Firewall Template Easiest thing to do is to have someone draw the A/C firewall outline on a piece of paper and overlay it on your existing firewall. Mark the A/C design and cut the firewall appropriately. Better solution might be to go to an aftermarket setup eliminating the big box under the hood and a lot of old design stuff under the dash. New systems use a much more efficient compressor, are R34 current stuff, and take up less room. You may have to sacrafice some glove box space but the end result will probable be a lot less expensive.