|
Re: springs or spindles?
I think Paul told you "square up" on the springs, much more than 2 - 2 1/2" will cause problems. He!!, if you go 2 1/2" spindles, its only about a bill more than the springs.... you can chop a full ring off the bottom of the springs, & figure about 2 1/2" drop. If I do the math, that looks like 5 " on the front, but its a tad more pricey. You can keep the 6 lug wheels if you like, Paul has the rotors to fit  Best of luck,  L
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....
|