The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

c-1072 · 08-21-2006, 01:34 AM

what i usaly do is grind a srew head to fit the plastic clip for the kick down . I then use a couple of nuts to bolt it to the carb spacing the ground screw head away from the carb to give the plastic clip room to swivel . I moved my return spring to the front by fabing a bracket off of an intake bolt .i might be able to get a pic in a day or two if needed .

08-21-2006, 01:34 AM	#4
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	Re: Edelbrock Throttle Linkage? what i usaly do is grind a srew head to fit the plastic clip for the kick down . I then use a couple of nuts to bolt it to the carb spacing the ground screw head away from the carb to give the plastic clip room to swivel . I moved my return spring to the front by fabing a bracket off of an intake bolt .i might be able to get a pic in a day or two if needed .