I have read a ton of posts on the different drops that are here on the forum. I am planning a 4/6 static drop on my 84 stepside. I am thinking that a drop spindle and spring setup in the front and a flip kit and c-notch in the rear will give me what I want. I might have to do the hangers or shackles to get the 6 inch drop in the rear. I am currently running 15's Centerlines and I don't want to have any interference with the spindles.
1. So which brand spindle and springs should i get?
2. I have seen different designs with the c-notches. Some are semi-circular and some are angular. Is there any advantage of one over the other? If so which brand is the best? I would like to bolt it up and then weld it up later as I don't have a welder easily accessible.
I know what some will say.....bag it. I think that it would look good, but I don't want to mess with it right now. Plus, the parts that I am getting will hopefully still be able to be used if in the future I bag it.
