View Single Post
Old 08-26-2006, 10:20 PM   #3
68jimmy
Registered User
 
68jimmy's Avatar
 
Join Date: Dec 2003
Location: albuquerque
Posts: 431
Re: Need help with prop valve

Well I got it to work finally... Here is how:

1. Removed the switch from the prop valve and re-centered the valve. Re-installed the switch.

2.Re-bled the brakes but this time I did the gravity method, starting with the rears on the right side.

3. After the bleed the pumped the brake pedal a few times and let it set. Meanwhile I re-checked the switch with the test light, no light all is good.

4. Re-bled the brakes once more, gravity method once again.

5. Cleaned up and took it for a spin!

__________________
78 C10 LWB Super Cheyenne
68jimmy is offline   Reply With Quote