Quote:
Originally Posted by Inthuwind
Are you using an adjustable panhard bar? And, does it hit your cross beam in the back on the right hand side? I just installed the rear axle, bags, the panhard bar, and 2 inch blocks, and mine hits. Any help and pics would be greatly appreciated. Also, what kind of shocks did you use and did you use rear relocator kit? sorry for all of the questions, just trying to get things right.
|
OK, let me try to get all these in the correct order:
I am using CPP's bolt in c-notch, and ECE's super track bar. I ended up not needing to use the 2" blocks, as after I cut a small square in the bed to clear the diff, it still bottoms out the axle on the snubbers in the notch. The only thing that I needed to clearance was one of the bolts in the notch where it was hitting. I simply flipped the bolt and installed it from the bottom instead of from the top and it's fine now. If I removed the snubbers I would gain 3/4" in the notch and could use the 2" blocks, but I'd rather keep the snubbers in there and be able to slow-cruise aired out all the way. Metal on metal banging together doesn't sound or feel too good.
I'm running Doetsch Tech shocks and the ECE relocator kit. What pics do you need me to take for you? If you can specify I'll try to do it for ya. I'm leaving for the RA show in Tennessee thursday night, but sadly not taking my truck now due to money issues but I'll be back Monday, so PM me if I don't answer here and I'll get back to you.