|
Re: Sitting on top of the world! (new seats installed)
The dash pad was probably the easiest part to do. All you have to do is unscrew the dash bezel, and there are 4 screws on the front of the bottom lip of the pad on the passenger side, and one screw on the side of the pad on the side of the dash next to the passenger door. When they are all out, the dash pad just pops off. It’s just held on by clips at the front. The one thing I have to note, is the gage bezel is different for the 84’s and up. So I had to do a little work with my Dremmel to get it to fit right. I’m using the bottom corner from my old bezel that has both the wiper, and the headlights so it looks good.
I looked at the replacement pads, and you have to be careful. There are a lot that just go over the pad, and aren’t replacements. I got a hell of a deal on the burbon that I bought, so I didn’t have to deal with getting it all piece by piece.
Norm
|