The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Anyone have engineering diagram or measurements

*Ozona* · 10-12-2006, 09:36 AM

I hopped under there and did my best. Here's what I came up with:

42.5" Center to Center for leaf spring perches, NOT 43" (Clearly not 43")

28" Center to Center for leaf spring rear shock perches

34.5" Center to Center for bump stops (welded to rear housing)

Now just have to figure out how to get accurate outside of drum to outside of drum measurement.

Hope this helps someone...if anyone has the outside drum to outside drum measurements for me to compare to that would be huge.

Thanks!

10-12-2006, 09:36 AM	#5
Ozona Account Suspended Join Date: Jan 2006 Location: Fort Worth Posts: 155	Re: Anyone have engineering diagram or measurements - 72 leaf spring rear? I hopped under there and did my best. Here's what I came up with: 42.5" Center to Center for leaf spring perches, NOT 43" (Clearly not 43") 28" Center to Center for leaf spring rear shock perches 34.5" Center to Center for bump stops (welded to rear housing) Now just have to figure out how to get accurate outside of drum to outside of drum measurement. Hope this helps someone...if anyone has the outside drum to outside drum measurements for me to compare to that would be huge. Thanks! Last edited by Ozona; 10-12-2006 at 01:24 PM.