The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

stacerbob · 10-19-2006, 08:24 PM

Anybody got pics?

I need to do something on mine. It has some turbo muffs laying/standing up by the control arms with turndowns. They hit the floor & the CA. Do you guys buy that crossmember & run it through, cut holes in the OE, go under it, outside the frame? I would like them to come out kinda pointing down right behind the rear tire, or go outside the frame & come out right in front of the tire. MAGNAFLOW has a 4" round by 14" long (body) stainless that would free up abunch of room. I will probably mount the exhaust solid but with an insulator & have stainless flex pipes right at the motor. I am also not above having a Y-pipe with a single exhaust but would rather have duals!!

THANKS!!

10-19-2006, 08:24 PM	#1
stacerbob BODY SHOP SUPPLIES INC. Join Date: Oct 2006 Location: NE Arkansas Posts: 198	Exhaust ? on 2wd Blazer Anybody got pics? I need to do something on mine. It has some turbo muffs laying/standing up by the control arms with turndowns. They hit the floor & the CA. Do you guys buy that crossmember & run it through, cut holes in the OE, go under it, outside the frame? I would like them to come out kinda pointing down right behind the rear tire, or go outside the frame & come out right in front of the tire. MAGNAFLOW has a 4" round by 14" long (body) stainless that would free up abunch of room. I will probably mount the exhaust solid but with an insulator & have stainless flex pipes right at the motor. I am also not above having a Y-pipe with a single exhaust but would rather have duals!! THANKS!!