The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

beaterC10 · 10-26-2006, 08:20 AM

I will concurr with Slonaker on interference with 3" spindles and alloy wheels. I had alloy wheels on my truck when I installed the Belltech spindles and replaced them with van ralleys. The alloy wheels had a thicker cross section than the ralleys and would not clear the underside of the lower control arm. I didn't pusue the alloy wheels since I had planned to install ralleys all along.

You might be able to solve the clearance issues with spacers behind the wheels.

10-26-2006, 08:20 AM	#8
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	Re: Pic request, trucks with a 3/4 drop. I will concurr with Slonaker on interference with 3" spindles and alloy wheels. I had alloy wheels on my truck when I installed the Belltech spindles and replaced them with van ralleys. The alloy wheels had a thicker cross section than the ralleys and would not clear the underside of the lower control arm. I didn't pusue the alloy wheels since I had planned to install ralleys all along. You might be able to solve the clearance issues with spacers behind the wheels.