[67chevemall]

Thanks guys I'm almost to nervous to run it to check the timing. All I need is engine damage. I have to give it a try though.
I'm trying to get everything together before I start it.
My vaccum line is to short to reach to other vacc. port on the carb.
I have it on the left one now because it reaches there, but the install manual says I should have check the hose while running to see if there was vaccum or not.
I think I should get the vaccum hose on the right port first but I'm not sure which one to use.
Then I'll get out the timing gun and turn the dizzy till it stops pinging
Then I'll tune the carb.
??