The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

powermad · 10-30-2002, 07:59 AM

You have to remove the whole lock out assy to get to the goods
Not just the cover.
My socket is a Snap On one so the Part # will be different But mine has 4 lugs on it, the socket for the 14 Full floater has 6 and is bigger around than the D44 one.
The front socket is 2 3/8" wide.
It sounds like you have the socket for a rear axle.
If you have a 14 bolt full floater keep it, if you have a semi floating one then take it back.

10-30-2002, 07:59 AM	#11
powermad Hillbilly Hotrod Join Date: Nov 2001 Location: Oregon Posts: 69	You have to remove the whole lock out assy to get to the goods Not just the cover. My socket is a Snap On one so the Part # will be different But mine has 4 lugs on it, the socket for the 14 Full floater has 6 and is bigger around than the D44 one. The front socket is 2 3/8" wide. It sounds like you have the socket for a rear axle. If you have a 14 bolt full floater keep it, if you have a semi floating one then take it back. __________________ 69 K5, .060 over 350/465/205.