Quote:
Originally Posted by 67Fleet
Where do you have your bags mounted out back? With the KP step notch where do they mount up top? Still in the factory spring location? Reason I ask is because I just have the CPP bolt-in c-notch and have Slam RE7 bags and they are on the internal bumpstops when I air it out and the axle is just touching the top of the notch without the snubber in it. I don't see how I'd get any lower with the bags in the factory location so it would be pointless to do a stepnotch unless I mount the bags elsewhere. Do you have any pics of your setup?
|
I ditched the setup last month and im building a full backhalf with a kp 4 link as we speak. I am buying a dropmember from porterbuilt in a few months so i need to get the rear a few inches lower. When i had the step notch i made a bridge between the notch's and mounted my bags on the front of the axle with a kit from suicidedoors. I dont have any pics but its just your basic bridge kit with bags mounted in front of the axle not over it like some do. If you want to keep the bags in the stock location and get very low, you are gonna have to build your own notch and bring it all the way up past where the trailing arms cross under the frame. How low do you wanna go? Keep in mind that your not gonna get much lower without going into the bed floor.