The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

QKENUF4U · 12-03-2006, 12:14 PM

just remember you get what you pay for. the knurling will eventually go away/wear down and put you back at square one. been there done that. see if you can find a good set of heads, if the motors not a hot rod motor then find a good set of cheap new/rebuilt heads and put them on , that way the heads last a long time and your not wasting money.

12-03-2006, 12:14 PM	#6
QKENUF4U Senior Member Join Date: Jan 2005 Location: SUNNY WARM BIKE RIDING COTTONWOOD ARIZONA Posts: 2,097	Re: Reaming valve guides just remember you get what you pay for. the knurling will eventually go away/wear down and put you back at square one. been there done that. see if you can find a good set of heads, if the motors not a hot rod motor then find a good set of cheap new/rebuilt heads and put them on , that way the heads last a long time and your not wasting money.