The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

piecesparts · 12-08-2006, 08:48 PM

Running a Comp Cams Roller cam #XR264HR and Comp Magnum roller rockers in a 383 stroker, 9.5 to 1 ratio motor. The cam is set at 107 degrees. It is tied through a 2400 stall converter / 700R4 tranny to a 3.73 Posi, 12 bolt rear end. Ever since I installed the stall converter, the truck pulls hard from 2000 to 4500 and sounds good. The heads are not aluminum, but are cast Dart II Sportsmen, connected to a dual 2 1/2" exhaust system with long tube headers and flowmasters.

12-08-2006, 08:48 PM	#1
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: What SBC cams are people running?? Running a Comp Cams Roller cam #XR264HR and Comp Magnum roller rockers in a 383 stroker, 9.5 to 1 ratio motor. The cam is set at 107 degrees. It is tied through a 2400 stall converter / 700R4 tranny to a 3.73 Posi, 12 bolt rear end. Ever since I installed the stall converter, the truck pulls hard from 2000 to 4500 and sounds good. The heads are not aluminum, but are cast Dart II Sportsmen, connected to a dual 2 1/2" exhaust system with long tube headers and flowmasters.