The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

04Xrider · 12-14-2006, 09:34 AM

Depending on what year the column is will depend on how the key cylinder comes out, most of the locks in columns have the release inside, which means you will need to pull the steeringwheel to get to it. If you just want to get the key out, try a hack saw blade. Just trim the smooth side of the blade down till it is pretty thin, and you should be able to fish it out.

12-14-2006, 09:34 AM	#2
04Xrider Registered thread killer Join Date: Nov 2006 Location: Cookson, OK. Posts: 349	Re: HELP! 64, need to get ignition out. Depending on what year the column is will depend on how the key cylinder comes out, most of the locks in columns have the release inside, which means you will need to pull the steeringwheel to get to it. If you just want to get the key out, try a hack saw blade. Just trim the smooth side of the blade down till it is pretty thin, and you should be able to fish it out. Last edited by 04Xrider; 12-14-2006 at 09:34 AM.