The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

BK · 12-25-2006, 03:07 AM

ran a 4" z. i didnt have an HEI dist. but didnt have problems because i used the front set of motor mount holes on the crossmember, and drilled one more hole on each side. it moved the engine ahead 3" and gave plenty of clearance. i did have to cut alot of the floor, for the 700R4.

12-25-2006, 03:07 AM	#10
BK BK Built Join Date: Aug 2004 Location: Oroville, WA Posts: 478	Re: Questions about "Z"ing ran a 4" z. i didnt have an HEI dist. but didnt have problems because i used the front set of motor mount holes on the crossmember, and drilled one more hole on each side. it moved the engine ahead 3" and gave plenty of clearance. i did have to cut alot of the floor, for the 700R4.