The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Sweet72 · 12-26-2006, 09:56 PM

There are half a dozen little spring clips (part of the rubber and felt wipers in the kit) that lock into small slots in the door. With a small screwdriver you can release the clips one at a time. Take careful note how the clips are attached to the door before removing so you get your new ones installed correctly. It's easy to bend the crap out of the wipers as your frustration escallates, so be careful! I have only done this with the window removed.

12-26-2006, 09:56 PM	#2
Sweet72 Registered User Join Date: Nov 2003 Location: Alexandria, VA Posts: 1,534	Re: Window rattle kit There are half a dozen little spring clips (part of the rubber and felt wipers in the kit) that lock into small slots in the door. With a small screwdriver you can release the clips one at a time. Take careful note how the clips are attached to the door before removing so you get your new ones installed correctly. It's easy to bend the crap out of the wipers as your frustration escallates, so be careful! I have only done this with the window removed. __________________ '72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction.