The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

arkracing · 12-27-2006, 08:49 PM

Thermal Dynamics is the way to go:
Reason: They specialize in Plasma Cutters. Lincoln, Esab, Miller, Hobart Specialize in Welders. Everybody has thier niche.

That being said I wouldn't buy any plasma cutter that is 400-600 it will not make you happy - you will probably be able to cut stuff over 1/8" thick better with a torch.

I know sombody with a small thermal dynamics that is 110 and has a built in aircompressor. I Am NOT Impressed

But I have used the bigger thermal dynamics machines and they rock

Kinda interesting the biggest machine runs on 110 and 220? -
http://www.parkermetalworking.com/

12-27-2006, 08:49 PM	#6
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	Re: Need some tool help Thermal Dynamics is the way to go: Reason: They specialize in Plasma Cutters. Lincoln, Esab, Miller, Hobart Specialize in Welders. Everybody has thier niche. That being said I wouldn't buy any plasma cutter that is 400-600 it will not make you happy - you will probably be able to cut stuff over 1/8" thick better with a torch. I know sombody with a small thermal dynamics that is 110 and has a built in aircompressor. I Am NOT Impressed But I have used the bigger thermal dynamics machines and they rock Kinda interesting the biggest machine runs on 110 and 220? - http://www.parkermetalworking.com/ __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered Last edited by arkracing; 12-27-2006 at 08:51 PM.