View Single Post
Old 01-12-2007, 09:53 PM   #7
kevinr1970
Senior Member
 
Join Date: Aug 2004
Location: Everett, WA
Posts: 2,316
Re: Lift questions????

Quote:
Originally Posted by Zoomad75 View Post
My question is, does the parts truck have an engine in it? The difference in how they sit will differ if one is without an engine.
Yes, both trucks still have engines and tranny's in them. Both small blocks, one is a 350 and not sure what the other is?
Quote:
Originally Posted by Zoomad75 View Post
Might just be the perspective of your pics, but the blue truck looks like it has bigger tires on it. Seeing as how both trucks are 1/2 tons, the springs should be the same except for actual use/sagging. I don't know that you are going to gain any lift with stock 1/2 ton springs.
The blue truck has 33's and the red truck has 31's. Which is why I'm puzzled. The red truck has tires that reduce height about 1" plus the springs have been changed out.
The rims/tires on the blue truck were on the red truck to begin with. When those rims/tires were on the red truck I had a different set of 33's on the blue truck and the red trucks hood was noticable higher (wish I would have taken a picture!?!).

My thoughts now are that the springs that came off the red truck and are on the blue truck now are shot.
This weekend I am going to pull the front springs that are on the red truck and put them back on the blue truck but put the helper spring on with it. Hopefully this brings it up level?
__________________
2009 Honda Fit CfC (bsf 44.9 mpg)
2000 Tahoe Limited
1991 GMC CrewCab Dually 2wd, will end up swb, not dually and replace CCswb below
1991 GMC CrewCab Dually 4x4, just going to fix things up for now
1982/1989 K5/GMC Jimmy 2wd
1987 GMC 1/2 ton swb 2wd Crew (sold)
kevinr1970 is offline   Reply With Quote