The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

shifty · 01-13-2007, 12:58 AM

sign up at Ls1tech.com. Yes, the wiring layout can be found there in the "Conversions and Hybrids" forum. Brackets - $50 - fab your own out of 1/4" steel.

Have fun with that harness. There's a reason people pay a couple hundred dollars to do it. For the record, I got both my harness worked out AND the PCM reprogrammed for less than $400. Wait4me Performance. Good work, poor communication, and I still need to do some of the wiring to add relays, fuses and other stuff. You skimp on $$$ you suffer with this swap. The more money you put into it, the less headaches you have and the less chance for chasing down gremlins later.

Good luck.

01-13-2007, 12:58 AM	#2
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: LS1 Engine Harness and A/C Bracket??? sign up at Ls1tech.com. Yes, the wiring layout can be found there in the "Conversions and Hybrids" forum. Brackets - $50 - fab your own out of 1/4" steel. Have fun with that harness. There's a reason people pay a couple hundred dollars to do it. For the record, I got both my harness worked out AND the PCM reprogrammed for less than $400. Wait4me Performance. Good work, poor communication, and I still need to do some of the wiring to add relays, fuses and other stuff. You skimp on $$$ you suffer with this swap. The more money you put into it, the less headaches you have and the less chance for chasing down gremlins later. Good luck. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.