The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

jeffspower · 01-13-2007, 10:08 PM

Are you saying that the pedal won't go past 1/2 way down at all? like it "hits" something? If so, pull the pushrod boot off the slave & see if the piston is bottoming out on the snap ring that holds it from popping out (at least I think there is a snap ring). If this is what it is doing, It would have to be the wrong throwout brg. or something strange goig on

01-13-2007, 10:08 PM	#8
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	Re: clutch won't disengage Are you saying that the pedal won't go past 1/2 way down at all? like it "hits" something? If so, pull the pushrod boot off the slave & see if the piston is bottoming out on the snap ring that holds it from popping out (at least I think there is a snap ring). If this is what it is doing, It would have to be the wrong throwout brg. or something strange goig on __________________ '68 GMC shortbox 4x4 350/SM465/T221- bought it in '83 SOLD '72 K20 500 Cad/TH400/NP205 SOLD '92 Chevy 2500 6.5 mech TD 4L80E crusty daily driver '72 Monte Carlo... sweet low mile toy '11 Dodge Challenger IE 392 6spd... midlife car