The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

JimKshortstep4x4 · 01-16-2007, 11:19 AM

Attached to this post is a drawing with the dimensions of the upper and lower door shims. We had ours made on a Lazer cutter which worked out well. (Unfortunately the machine is no longer in the state).

We used .100 thick stainless steel but CRS or HRS would work also. We chose the thickness of .100 but other thicknesses of shims could be made.

Jim

01-16-2007, 11:19 AM	#1
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Draggn66, RE: door shim dimensions Attached to this post is a drawing with the dimensions of the upper and lower door shims. We had ours made on a Lazer cutter which worked out well. (Unfortunately the machine is no longer in the state). We used .100 thick stainless steel but CRS or HRS would work also. We chose the thickness of .100 but other thicknesses of shims could be made. Jim Attached Images