The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

piecesparts · 01-17-2007, 09:54 PM

I put this motor in my 84 GMC with the Thunder AVS carb and a solid fuel line from Edelbrock. I have the Edelbrock fuel pump on the side of the motor feeding up to the billet fuel filter that is on the Edelbrock solid feed line. The fuel line is summit's braided line with AN fittings on it for finish. I decided a while back that I was done with fuel line hose clamps. From now on I will use finished fittings.

01-17-2007, 09:54 PM	#5
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: Clean up the motor and compartment I put this motor in my 84 GMC with the Thunder AVS carb and a solid fuel line from Edelbrock. I have the Edelbrock fuel pump on the side of the motor feeding up to the billet fuel filter that is on the Edelbrock solid feed line. The fuel line is summit's braided line with AN fittings on it for finish. I decided a while back that I was done with fuel line hose clamps. From now on I will use finished fittings. Attached Images Last edited by piecesparts; 01-17-2007 at 09:55 PM.