|
Re: Making preparations to pull motor.
digi photos will help on the vac lines, and bracket locations... or poor art work (drawings) will do if there's no digi cam.
Mark, you forgot to pull the hood!
fan shroud needs to come off if you still have it
Disconnect the fuel line at the fuel pump, the frame side of the line.
If you don't have a carb lift plate, then no need to buy one. They are nice, but not needed.
If you have power steering, unbolt it from the engine, and flop it over on the frame... same for a/c stuff
If the engine is original and unmolested, then there are ground straps on the valve covers to firewall, unbolt them
take your time, tripple check everything. Lift the motor a few inches, then look at everything again.
|