|
Re: solid lifter cam experts please
after reading all the replys and doing a little searching i am feeling good about going with solid lifter cam. but i think i should bump the CR up to around 10.5:1. i will most likely have to put some additives in the pump gas, thats okay. i am not sure on how to raise CR without spending a lot of money. as i see it i have 2 choices. take the old heavy TRW 24cc dish pistons i have and cut them to a flat top with valve reliefs and change over to 5.7 rods. or just buy some new pistons and leave the stock length rods. i dont know if i really need the longer rods for what i am going to do. will still use 64 cc heads. i will have to buy all bearings and rings. so what is best way to get CR up? could really use some help here. thanks. pkj
|