The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**bigdon-70blazer** · 01-19-2007, 07:53 AM

Help me out guys! I Stripped one of the top bolt holes for the steering gear box to the frame, longer story but it happened. The other 3 are fine but I was going to fix it by putting a nut on the other end... Does that sound ok to you? I could redrill the hole and tap it bigger but there is not a lot of metal there to begin with so thought this would be an easy and fast fix. Need suggestions!!! Thanks for a great place to sound off! bigdon

01-19-2007, 07:53 AM	#1
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	70 Blazer steering gear box question Help me out guys! I Stripped one of the top bolt holes for the steering gear box to the frame, longer story but it happened. The other 3 are fine but I was going to fix it by putting a nut on the other end... Does that sound ok to you? I could redrill the hole and tap it bigger but there is not a lot of metal there to begin with so thought this would be an easy and fast fix. Need suggestions!!! Thanks for a great place to sound off! bigdon Last edited by bigdon-70blazer; 10-04-2007 at 05:47 PM.