The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

cdowns · 01-21-2007, 07:42 PM

there should also be a ground wire fob the box to the frame// i've always put it from the rear sill of the box to the rear crossmember don't know if thats the factory correct but it grounded good and the lights worked//you could also clean up the back of the reflector where it mounts to body panel to get a gooder ground too

01-21-2007, 07:42 PM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: how do the tail lights ground themselves there should also be a ground wire fob the box to the frame// i've always put it from the rear sill of the box to the rear crossmember don't know if thats the factory correct but it grounded good and the lights worked//you could also clean up the back of the reflector where it mounts to body panel to get a gooder ground too __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY Last edited by cdowns; 01-21-2007 at 08:19 PM.