The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

jdmaffeo · 01-22-2007, 03:12 PM

There is some wiring trace work that you will have to do. I have completed this in my 84. I ended up having to trace each wire and then taking them out of the plug end and putting them into a completely different order. You will also have to get the sending units for the gauges (temp, oil pressure). If you get a cluster with a tach, you will need to get the harness as well.

01-22-2007, 03:12 PM	#7
jdmaffeo Registered User Join Date: Dec 2005 Location: Dallas, TX Posts: 241	Re: Guages where lights were There is some wiring trace work that you will have to do. I have completed this in my 84. I ended up having to trace each wire and then taking them out of the plug end and putting them into a completely different order. You will also have to get the sending units for the gauges (temp, oil pressure). If you get a cluster with a tach, you will need to get the harness as well. __________________ 1984 Chevy Stepside, 4spd granny, 4 1/2 front/6 inch rear drop.