The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

PICKMUP · 01-26-2007, 01:20 PM

If you will just contact CPP they will sell you a changeover system for your truck that includes all of the correct parts & instructions. You won't need to go looking for any mix-n-match used parts and you won't take the chance of getting the wrong/dangerous parts.
1. You can get spindles that will bolt on to your 67, as stated above.
2. You can get a kit that includes the ball joints & tierod ends & sleeves (they use 73+ parts that are a little more common & cheaper to replace).

01-26-2007, 01:20 PM	#5
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,168	Re: Ball joints... If you will just contact CPP they will sell you a changeover system for your truck that includes all of the correct parts & instructions. You won't need to go looking for any mix-n-match used parts and you won't take the chance of getting the wrong/dangerous parts. 1. You can get spindles that will bolt on to your 67, as stated above. 2. You can get a kit that includes the ball joints & tierod ends & sleeves (they use 73+ parts that are a little more common & cheaper to replace).