Quote:
Originally Posted by IvelDesigns
the track bar mount should be on the left(drivers side) frame rail.
how far off is it? can you adjust the bar to fit into it? and have you measured to see if your axle is sitting in the middle of your truck? you should be able to measure from your tire to your framerail on each side to see if it's centered or not.
|
the bed is not on. the axle perches are not welded either. should i leave the track bar off until i get the perchs welded? it is off about an inch and can't adjust the play with the jam nut. there is not any weight on the axle and it is hanging free. 5" rear springs