The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

lngbed71 · 01-31-2007, 04:43 AM

Naw.....Before I went to bags, I had 3" drop spindles AND cut a half coil. No notching or anything was needed. After I re-installed the springs, it looked raised like you describe, then I realized you need to flatten the bottom of the spring so it rests in the lower arm properly.

01-31-2007, 04:43 AM	#6
lngbed71 Nothing fits but the oil Join Date: Mar 2003 Location: Gaston, Indiana Posts: 424	Re: how low will i be? in the front..... Naw.....Before I went to bags, I had 3" drop spindles AND cut a half coil. No notching or anything was needed. After I re-installed the springs, it looked raised like you describe, then I realized you need to flatten the bottom of the spring so it rests in the lower arm properly. __________________ Land of the free Because of the brave