The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

qksilver · 02-03-2007, 10:51 PM

it is on one of the caps about 1/3 third the way around about 1/2 inch from the tip. It looks like it was done with a hack saw , so the cut is probably about an eight of an inch wide.
I am not sure but I think a new cap runs about 10 bucks
thanks,
Steve

02-03-2007, 10:51 PM	#10
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: 15X8 6 lug M/T Classic II in NC it is on one of the caps about 1/3 third the way around about 1/2 inch from the tip. It looks like it was done with a hack saw , so the cut is probably about an eight of an inch wide. I am not sure but I think a new cap runs about 10 bucks thanks, Steve Last edited by qksilver; 02-03-2007 at 10:51 PM.