The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

13lazer · 02-05-2007, 01:19 PM

i am adding about a 6" spring lift to my 1 ton blazer project. i need to do it as low budget as i can. im making custom spring hangers for the rear, and the front if necessary. i have the 14 bolt rear and the corporate 10 bolt with the big tubes for the front. my blazer is a 1972 loaded cst. i have the rear lift handled. my question is, what vehicles in the junkyard might have thin spongy springs with enough arch to give me the lift i want in the front? any suggestions will be appreciated.

13lazer

02-05-2007, 01:19 PM	#1
13lazer 13lazers' blazers Join Date: Jul 2005 Location: San Pedro, CA Posts: 152	front spring lift ? i am adding about a 6" spring lift to my 1 ton blazer project. i need to do it as low budget as i can. im making custom spring hangers for the rear, and the front if necessary. i have the 14 bolt rear and the corporate 10 bolt with the big tubes for the front. my blazer is a 1972 loaded cst. i have the rear lift handled. my question is, what vehicles in the junkyard might have thin spongy springs with enough arch to give me the lift i want in the front? any suggestions will be appreciated. 13lazer __________________ 1970 2wd blazer 1972 1ton blazer 4x4 in progress 1966 mustang coupe (modified) 1985 c20 suburban tow rig 1996 462 ranger with a 150 efi merc. a former B.A.S.S. tournament boat almost all exempt from california smog laws intentionally.