The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Texasdeere · 02-12-2007, 09:51 PM

I believe what you have is the 1/2 ton caps. I had a set like this on my 74 Cheyenne 1/2 ton. But I see two sets of the 5 spoke design like yous on ebay being advertised as 3/4 ton caps.

Here is a same vintage six spoke 3/4 ton cap, which is about 12 inches wide:

02-12-2007, 09:51 PM	#9
Texasdeere Registered User Join Date: Sep 2006 Location: League City, Texas Posts: 732	Re: Help Identifying Hubcaps I believe what you have is the 1/2 ton caps. I had a set like this on my 74 Cheyenne 1/2 ton. But I see two sets of the 5 spoke design like yous on ebay being advertised as 3/4 ton caps. Here is a same vintage six spoke 3/4 ton cap, which is about 12 inches wide: Attached Images Last edited by Texasdeere; 02-12-2007 at 09:58 PM.