Quote:
Originally Posted by piecesparts
A 3" drop is possible with the use of a wheel that has no more that a 4.5" backspace. I am running Belltech 3" drop spindles and a set of drop springs that are giving me another 1/2" with a 15" X 8" Weld Wheel on my 84 with no problems. I did have to trim a little off of the bottom 'A' Frame at the very tip, but it was very little.
|
Thanks for the info! I'm running 15x10's all around and I believe (actually more like hoping) that they have a 4.5" backspace. I'll probably have to end up pulling some McGyver move to make something happen.