The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

C3500 · 02-14-2007, 01:51 PM

i changed my 4x4 sub to a 2wd. its not that hard it just takes alot of time. you need to get the front cross member, and trans cross member. the motor is pushed back 2 inch i think. you need to get the radiator mounts so the leaf can bolt up. the leaf hanger is bolted in to the frame under the cab you need to get that. and a trans tunel. thay are the same frames!! everything crosses over so good luck.

02-14-2007, 01:51 PM	#3
C3500 Registered User Join Date: Feb 2007 Location: santa clara Posts: 27	Re: 2wd to 4x4 i changed my 4x4 sub to a 2wd. its not that hard it just takes alot of time. you need to get the front cross member, and trans cross member. the motor is pushed back 2 inch i think. you need to get the radiator mounts so the leaf can bolt up. the leaf hanger is bolted in to the frame under the cab you need to get that. and a trans tunel. thay are the same frames!! everything crosses over so good luck.