|
Re: Dropmember in a 69 C10
Brad,
Nathan designed the dropmember to run at a 5" ride height.
2wd will need drop spindles and will put the frame rails on the ground.
4wd with stock spindles will do the same.
On Kyle's blazer in the 69-72 Blazer forum, the rear has been c-notched so the bottom of the "c" is the same height as the top of the rest of the rail.
__________________
Jim
'71 Blazer-Porterbuilt Dropmember C4/LS1/6L80E
'57 VW beetle - Oct. 2006 Hot VW's pg. 87 - 350hp intercooled, turbocharged, EFI 2.3liter and 5spd in the works
'87 BMW 325i - daily driver
Last edited by babyblueoval; 02-18-2007 at 04:00 PM.
|