The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 1966 c-10 brake help

AMF · 02-22-2007, 03:06 PM

Right, I pulled the hub/drum as one unit. I've sprayed some wd-40 on it and let it sit for awhile, and used the hammer/wood approach to no avail. I'll go after it with a wire brush here shortly and some more wd-40, then i'll get a bigger hammer =D

(As for the drivers side, I pulled it off in 2 units: The face of the drum/hub as one piece, and the ring of the drum as another. It came apart while I was driving and that was the reason for me doing this bit of brake work to begin with...Never seen that happen before, lol)

02-22-2007, 03:06 PM	#5
AMF Registered User Join Date: Sep 2006 Location: Kansas Posts: 9	Re: 1966 c-10 brake help Right, I pulled the hub/drum as one unit. I've sprayed some wd-40 on it and let it sit for awhile, and used the hammer/wood approach to no avail. I'll go after it with a wire brush here shortly and some more wd-40, then i'll get a bigger hammer =D (As for the drivers side, I pulled it off in 2 units: The face of the drum/hub as one piece, and the ring of the drum as another. It came apart while I was driving and that was the reason for me doing this bit of brake work to begin with...Never seen that happen before, lol)