The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

alec22 · 02-22-2007, 10:16 PM

Can anyone confirm these wire colors? My truck has the green colored wires clipped about half down the frame and there's also NO plug to plug in the valve. I've picked up a 6 port valve (I have an '85) and plug. It's currently running on one tank without a selector valve or cross over lines.

Also, the vapor canister has been removed and there is no return line from the carb. (aftermarket holley installed). Should I just block of the return line and vent lines? The gas caps are vented so they'll be a vent on the tanks.

02-22-2007, 10:16 PM	#4
alec22 Registered User Join Date: Dec 2006 Location: Jacksonville, Fl Posts: 12	Re: Dual tank help Can anyone confirm these wire colors? My truck has the green colored wires clipped about half down the frame and there's also NO plug to plug in the valve. I've picked up a 6 port valve (I have an '85) and plug. It's currently running on one tank without a selector valve or cross over lines. Also, the vapor canister has been removed and there is no return line from the carb. (aftermarket holley installed). Should I just block of the return line and vent lines? The gas caps are vented so they'll be a vent on the tanks.