|
Re: 6 lug Dana44 to 8 lug
Quote:
Originally Posted by Eichorst69
Thanks for all the help. What I have actually done is pulled the closed knuckle dana44 w/ drums out of my 69 3/4 ton 4x4. I have a dana44 open knuckle w/ disk from a 72 1/2 ton Blazer. I already took the gears, carrier, axels, etc. out of the old closed knuckle and put them in the open knuckle. Now I need to find 3/4 ton spindals, hubs, rotors, caliper mounts, etc. My main concern now is that I get 3/4 ton disk brake spindals that will work with this 72 dana44. The #'s on the axle tube are 128 2C4 and 603351 9.
Earl, I am in Boynton Beach, just south of W. Palm Beach.
Rob
|
to bad your so far down my dad lives in north Fla and I have a hole axle here if you cant find what you need PM me.
__________________
Earl
68 2500 4x4 GMC Burb
Last edited by earl87gta; 03-05-2007 at 05:24 AM.
|