The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

BK · 03-09-2007, 02:34 AM

i dont have any pics yet, but i will in about a week. it was a 10" notch i made from scratch, that extended forward past where the trailing arms would have hit the frame. The bags were mounted 8" ahead of stock springs for about 17" of lift. I fabbed up a watts link for the rear, stays dead center the whole range of motion. fabbed auto tranny crossmember. ECE extreme drop trailing arm crossmember. 4" z up front with 3" spindles. Should have layed on 22's out back and 20's up front. WHen it gets here, we will see. Im redoing the rear notch, and stepping and narrowing the front control arms 1".

03-09-2007, 02:34 AM	#9
BK BK Built Join Date: Aug 2004 Location: Oroville, WA Posts: 478	Re: UPS Boxes = Happiness! i dont have any pics yet, but i will in about a week. it was a 10" notch i made from scratch, that extended forward past where the trailing arms would have hit the frame. The bags were mounted 8" ahead of stock springs for about 17" of lift. I fabbed up a watts link for the rear, stays dead center the whole range of motion. fabbed auto tranny crossmember. ECE extreme drop trailing arm crossmember. 4" z up front with 3" spindles. Should have layed on 22's out back and 20's up front. WHen it gets here, we will see. Im redoing the rear notch, and stepping and narrowing the front control arms 1".