The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

*rage'nrat638* · 03-11-2007, 12:42 AM

#8 METERING BLOCK FUEL MIXTURE SCREWS
notice the little cork gasket that seals these screws, if they don't come out with the screw carefulley remove them from there hole with a small screw driver

PICTURED IS A JET REMOVER TOOL

CLEAN ALL YOUR PARTS, BLOW THEM DRY, WIPE WITH A TOWEL SIT ASIDE.

THE LAST PICTURE I HAVE MOVED AHEAD AND REMOVED THE ELECTRIC CHOKE THERMO STAT

03-11-2007, 12:42 AM	#8
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	Re: Holley 600 Rebuild / Overhaul #8 METERING BLOCK FUEL MIXTURE SCREWS notice the little cork gasket that seals these screws, if they don't come out with the screw carefulley remove them from there hole with a small screw driver PICTURED IS A JET REMOVER TOOL CLEAN ALL YOUR PARTS, BLOW THEM DRY, WIPE WITH A TOWEL SIT ASIDE. THE LAST PICTURE I HAVE MOVED AHEAD AND REMOVED THE ELECTRIC CHOKE THERMO STAT Attached Images Last edited by rage'nrat638; 07-25-2007 at 10:30 PM.