The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

*rage'nrat638* · 03-11-2007, 01:03 AM

#15 Here I Have Changed The Front Float Because It Did Not Work Right.

You Need To Bend The Float So The Needle And Seat Are In The Middle Of It's Adjustment.
And With The Floats Level. Bence Set, Were Good To Go.

Next I Install The New Front Pump Diphgram. Put It Together, With The Four Screws

03-11-2007, 01:03 AM	#15
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	Re: Holley 600 Rebuild / Overhaul #15 Here I Have Changed The Front Float Because It Did Not Work Right. You Need To Bend The Float So The Needle And Seat Are In The Middle Of It's Adjustment. And With The Floats Level. Bence Set, Were Good To Go. Next I Install The New Front Pump Diphgram. Put It Together, With The Four Screws Attached Images Last edited by rage'nrat638; 07-25-2007 at 11:03 PM.