The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

GMCMAX · 03-11-2007, 11:28 AM

If you convert the 2wd, it will need the high hump floor to clear the trans/transfer IIRC. I did mine, but it already had rear leaf. The front stuff will bolt in with some mods such as flattening or cutting out the big dimples where the e-brake goes through-- thats where my front spring mounts went.

03-11-2007, 11:28 AM	#12
GMCMAX Active Member Join Date: Jan 2006 Location: Lower Mid-East Ca. Posts: 326	Re: 2wd to 4wd swap??? If you convert the 2wd, it will need the high hump floor to clear the trans/transfer IIRC. I did mine, but it already had rear leaf. The front stuff will bolt in with some mods such as flattening or cutting out the big dimples where the e-brake goes through-- thats where my front spring mounts went. __________________ Never try to teach a pig to sing; it wastes your time and annoys the pig! Gets More Chicks My lugnuts require more torque than your honda makes! 68 GMC, 4X4 conversion w/73 k20 running gear and springs, 350 4spd, 4.10's, D44 powerlok front, 14BFF govlock rear, 33" tires, lifted 4".