The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Aarons72s · 03-14-2007, 07:54 AM

I agree with sammy on window removal. Cutting the seal is the best way to get the glass out without damage. As for the dash, once you remove the windshield you will see spot welds from one side to the other that hold the dash to the windshield pinch weld. Drill those out. Not to hard to do, took me about 30 minutes. Once you undo the spot welds just undo the 4 bolts that hold the sides of the dash to the cab inside the cab and you are done. Good luck.

03-14-2007, 07:54 AM	#3
Aarons72s Registered User Join Date: Apr 2006 Location: oklahoma Posts: 10,669	Re: window removal I agree with sammy on window removal. Cutting the seal is the best way to get the glass out without damage. As for the dash, once you remove the windshield you will see spot welds from one side to the other that hold the dash to the windshield pinch weld. Drill those out. Not to hard to do, took me about 30 minutes. Once you undo the spot welds just undo the 4 bolts that hold the sides of the dash to the cab inside the cab and you are done. Good luck.