The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

beaterC10 · 03-14-2007, 08:42 PM

There are two alignment pins on the chassis that mate with two holes in the A arm cross shaft. You will probably have to remove the a arm to see them.

03-14-2007, 08:42 PM	#5
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	Re: lower control arm and coil shifted There are two alignment pins on the chassis that mate with two holes in the A arm cross shaft. You will probably have to remove the a arm to see them.