The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

camaro__thunder · 03-21-2007, 02:02 AM

I would set some boards under the tires to see how high you can get the tires off the ground and keep the body on earth. I say this because mine set down hard into the rockers with the 3" Z(no pinch weld). Its funny when the body is on the ground and you can pick your wheels off the ground.

03-21-2007, 02:02 AM	#13
camaro__thunder Epoxy Primer Friendly Join Date: Feb 2004 Location: South of Houston TEXXXAS Posts: 680	Re: Not sure what to do about my z'd Frame I would set some boards under the tires to see how high you can get the tires off the ground and keep the body on earth. I say this because mine set down hard into the rockers with the 3" Z(no pinch weld). Its funny when the body is on the ground and you can pick your wheels off the ground. __________________ My Project 69 SWB SHAVED BAGGED DOORED Last edited by camaro__thunder; 03-21-2007 at 02:03 AM.